Product Brochure
Contact Us

Voortman V630 Beam Drill

 

Customers who require extremely high productivity can rely on the V630 drilling line with three independent drilling heads. The stable and high quality V630 can drill both flanges and the web at the same time, which strongly reduces working hours and operating costs. The fastest measuring system for profiles in the market is the Voortman roller feed measuring system. This system combines two driven and two pressure rolls, which use their large contact area to firmly clamp the profile. The two separate measuring discs keep an accurate track of the position of the profile while moving it with high speed. As the profile needs to be clamped only once, waiting time is eliminated.
FEEDER TRUCK MEASURING SYSTEM LAYOUT MARKING BY MILLING
For customers who require a lot of small products, or want to fully automate the removal of small products and clean cuts, Voortman also offers a strong servo driven feeder truck capable of moving even the heaviest profiles without losing its stability. More information about our automatic short product removal system can be found under the sawing machines section. The machine can utilize a layout marking tool to create part numbers, contours, welding information and detail part numbers for plates and angles that will be welded to the profile. Voortman’s layout marking tools employ high output air motors running at 20.000 rpm. The tools have a carbide tip with 4 usable sides which can easily be exchanged.
BOTTOM SIDE MARKING VACAD SOFTWARE
A separate unit can be installed in the drilling line, for layout marking the bottom side of the profile. This unit uses the same tool as the drilling line. VACAD is a CAD based drawing software fully integrated in our VACAM control system. It can be used to modify changes in the layout marking data from the loaded DSTV files if required. It can also be used to create layout marking data on manually programmed parts.
WEB AND FLANGE HEIGHT MEASUREMENT PROFILE WIDTH MEASURING
All our beam drilling lines automatically measure the web and flange height with a pneumatic probe. This design compensates for mill tolerance issues and corrects the machine automatically prior to running material. When the material is clamped, the width of the profile is measured. The software checks whether the correct profile size is inside the machine as well as compensating for mill tolerances.
HYDRAULIC NUMBERING UNIT AUTOMATIC TOOL CHANGERS
The hydraulic numbering unit can be used to mark products with part numbers, so it can be recognized in further production steps. The disc holds 36 characters, which are selected automatically. Each drilling head has its own automatic tool changer with 5 tools. This feature in combination with the overall unmatched automation level of the Voortman drilling lines eliminates the need of an operator being present at the drilling line!
CARBIDE DRILLING
Using synchronized servo drives with ball screws for each movement as well as a large 30 kW servo drive for the drilling spindle results in extreme acceleration. Maximum speed is reached in just a fraction of time, and maximum torque in the full range from 1 to 2.500 rpm is perfect for carbide drillig
SPECIFICATIONS V630/1000 V630/1250
Operating range mm
inch
450 x 1.050
18 x 41
600 x 1.250
24 x 49
Positioning weight kg
lbs
13.200
29,100
19.800
43,650
Drilling and positioning Servo motors Servo motors
Positioning speed X m/min
f/min
40
130
40
130
Positioning speed Y m/min
f/min
35
115
35
115
Positioning speed Z m/min
f/min
35
115
35
115
Drilling units 3 3
Nominal power kW
Hp
30
40
30
40
Speed rpm 0 – 2.500 stepless 0 – 2.500 stepless
Tool changer 3 x 5 3 x 5
Drill holder SK40 SK40
Drill diameter mm
inch
5 – 40
13/64 – 1-9/16
5 – 40
13/64 – 1-9/16
Thread tapping inch M6 – M30
1/4 – 1-3/16
M6 – M30
1/4 – 1-3/16
Cabin weight kg
lbs
12.000
26,450
12.000
30,850