Product Brochure
Contact Us

VoortmanV505M

V505M | FEATURES

2X DOUBLE PUNCH UNIT ANGLE SHEAR
Both V505M angle lines have automatic punch selection. The V505-160M has 2 double punch units, the V505-200M has 2 rotating punch units with 4 punches each. The shear blades of the Voortman angle lines can be used on 4 sides, each having a different radius to ensure the best quality cut.
2X 4-FOLD ROTATING PUNCH HEAD HYDRAULIC NUMBERING UNIT
The V505-200M is equipped with 2 punch stations. Each station has a rotating punch head with four punches and a die holder with three dies. When different hole sizes are required, the machine switches automatically between punch and die diameters. The hydraulic numbering unit can be used to mark products with part numbers, so it can be recognized in further production steps. The disc holds 36 characters, which are selected automatically.
ROLLER FEED MEASURING UNIT
The roller feed measuring system makes especially the short movements in these angle lines fast, which is very suitable to make clip angles. Another advantage is that next to processing angles, the roller feed system is also suitable for flat bars.
AUTOMATIC INFEED CROSS TRANSFERS AUTOMATIC OUTFEED SYSTEM
The entire infeed cross transport can be loaded with angles positioned next to each other. When the DSTV files are loaded, the system automatically separates the first angle and drops it down towards the roller conveyor. Rubber stoppers catch it just before hitting the rollers in order not to cause any damage.  To ensure the Voortman angle lines fully automatic production cycle, an automatic outfeed system can be added. This system exists out of a short liftable conveyor section to drop small pieces behind the shear without damaging the roller conveyor, a driven material advance to push the angle forward until it is free from the machine and a tilting conveyor to drop the angles in either of the two outfeed positions.
POWERED MATERIAL ADVANCE   COMPACT ALL-IN-ONE FRAME
The powered material advance system moves the angle lying in the roller conveyor forward and hands it over to the roller feed measuring system. This unit is required to make the entire system fully automated.
SPECIFICATIONS V505-160M V505-200M
Angle steel mm
inch
40 x 4 – 160 x 16
1-9/16 x 5/32 – 6-5/16 x 5/8
50 x 5 – 200 x 25
2 x 13/64 – 8 x 1
Flat steel mm
inch
75 x 6 – 160 x 16
3 x 1/4 – 6-5/16 x 5/8
75 x 6 – 300 x 25
3 x 1/4 – 11-3/4 x 1
Hydraulic unit KW
Hp
15
20
15
20
Hydraulic pressure bar
psi
315
4,570
315
4,570
Hydraulic flow L/min
Gal/min
105
28
105
28
Punches 2 x 2 2 x 4
Punch capacity tonnes
tons
70 (metric)
77
120 (metric)
132
Angle shear tonnes
tons
245 (metric)
270
400 (metric)
440
Punch and shear weight kg
lbs
6.295
13,880
9.000
19,850