Product Brochure
Contact Us

Voortman 505T

V505T | FEATURES

2X 3-FOLD ROTATING PUNCH HEAD ANGLE SHEAR
The V505-250T can be equipped with 2 punch stations. Each station has a rotating punch head with three or six punches and a die holder with three dies. When different hole sizes are required, the machine switches automatically between punch and die diameters. The shear blades of the Voortman angle lines can be used on 4 sides, each having a different radius to ensure the best quality cut.
2X DRILLING UNIT WITH TOOL CHANGER HIGH PRESSURE HYDRAULIC
The V505-250T can also be equipped with 2 drilling units, each having a tool changer with 5 tools. All axes, including the 30 kW drilling motor, are synchronized servo drives for optimal performance. The hydraulic system of the angle lines is optimized to a high volume and maximum pressure and flow, making the punching and shearing speed extremely fast.
FEEDER TRUCK WITH MATERIAL SENSOR
Making the V505T angle lines unique is the servo driven feeder truck, accelerating to its full speed of 100 m/min (328 ft/ min) in a fraction of time. The feeder truck is equipped with a material detection sensor eliminating manual intervention completely. It grips the material by itself and start processing immediately.

 

ADDITIONAL PUNCHES SERVO DRIVEN SPINDLES
The V505-250T punching unit is prepared to have 3 additional punches next to the standard 3 which are always included. An advantage if a lot of different hole sizes are used in the production, saving precious time to change tools. All the main movements within the machine are driven by synchronized servo drives with spindles, for example the movement of the punching frames and drilling units.
AUTOMATIC INFEED CROSS TRANSFERS AUTOMATIC OUTFEED SYSTEM
The entire infeed cross transport can be loaded with angles positioned next to each other. When the DSTV files are loaded, the system automatically separates the first angle and drops it down towards the roller conveyor. Rubber stoppers catch it just before hitting the rollers in order not to cause any damage. To ensure the Voortman angle lines fully automatic production cycle, an automatic outfeed system can be added. This system exists out of a short liftable conveyor section to drop small pieces behind the shear without damaging the roller conveyor, a driven material advance to push the angle forward until it is free from the machine and a tilting conveyor to drop the angles in either of the two outfeed positions.
HYDRAULIC NUMBERING UNIT VM 8/13 NUMBERING UNIT
The hydraulic numbering unit can be used to mark products with part numbers, so it can be recognized in further production steps. The disc holds 36 characters, which are selected automatically. The VM 8/13 exists out of a frequency driven rotating drum which contains 8 character magazines with each 13 characters. It can imprint a complete row of characters at once. When different character sets are required the machine switches automatically.