Product Brochure
Contact Us

IW110D/DX

IW 110D/DX – Heavy-duty, dual cylinder, completely integrated Ironworker with 110 ton capacity, 10 H.P., 12″ throat, 5 work stations and simultaneous dual operation. Capacity 6” x  6” x 1/2”

http://www.marvelsaws.com/wp-content/uploads/2012/12/IW1101.jpg

PRODUCT DESCRIPTION

PUNCHING:

  • Punch Pressure:  110 tons.
  • Quick Change Punch Holder and Jog Mode
  • Punch Work Table: Includes back gauge and adjustable stops.
  • Adjustable See-Through Punch Stripper:  For fast and easy setup.
  • Die Holder:  Adjustable in machined T-slots for quick punch and die alignment.
  • Standard Tooling:  1-1/2” in 11/16” material.
  • CPD Series: 26 punch, 62 die.
  • Large Tooling:  2” in 1/2” material.
  • CPD Series: SP51P punch, SP80D die.
  • Optional Oversize Tooling:  8” in 1/8” material.
  • Maximum Channel Flange:  7”
  • Throat Depth:  12” (D/2); 20” (DX/2).
  • Stroke Length:  3-15/16”
  • Cycles per Minute in 3/4”:  24.
  • Punching Station Work Height:  41-1/4”.

BAR SHEARING:

  •  Round Bar Capacity:  1-3/4”.
  • Square Bar Capacity:  1-3/4” x 1-3/4”.

Six Cavity Round and Square Bar Shear Sizes:

  • Round   1/2”, 3/4”, 1”, 1-1/2”
  • Square   3/4”, 1-1/2”
  • Channel Shear Max. (optional):  6”.
  • I-Beam Shear Max. (optional):   6”.
  • Bar Shear Work Height:  52-3/4”.

NOTCHING:

  • Rectangular Notcher:  2-1/2” x 3-1/2” x 1/2”.
  • Electrical Interlock Safety Guard
  • Gauge Table with Stops:  For precise positioning.
  • Notcher Work Height:  38”.
FLAT BAR SHEARING:

  • Flat Bar Shear Capacity:  24” in 5/8”.
  • Maximum Width x Thickness:  16” in 3/4”.
  • Lower Blade:  Four (4) usable edges.
  • Support Table:  Includes guides for accurate positioning
  • and indicator lines at 30 and 45 degrees left and right.
  • Adjustable Hold-Down:  Holds work piece securely in position when shearing.
  • Upper Shear Blade:  Provides for minimum distortion.  Two
  •      (2) usable edges.
  • Blade Length:  24-3/8”.
  • Angle Flange Trim:  4”.
  • Flat Bar Shear Work Height:  38”.

ANGLE SHEARING:

  • Maximum Capacity – 90 degrees:  6” x  6” x 1/2”.
  • Maximum Capacity – 45 degrees:  3-1/8” x 3-1/8” x 3/8”.
  • Shearing with no material loss and minimum deformity.
  • Shear Blades:  Four (4) usable edges.
  • Angle Shear Work Height:  48-1/4”.

SPECIFICATIONS

Punching Pressure 110 Tons Capacity 90° 6” x  6” x 1/2”
Large Tooling 2” in 1/2” material Angle Shear Work Height 48-1/4”
Oversize Tooling 8” in 1/8” material
Standard Tooling  1-1/2” in 11/16” material
Throat Depth  12” (D/2); 20” (DX/2)
Stroke Length 3-15/16”
Punching Station Work Height 41-1/4”
Round Bar Capacity 1-3/4”
Square Bar Capacity 1-3/4” x 1-3/4”
Round Shear 1/2”, 3/4”, 1”, 1-1/2”
Square Shear 3/4”, 1-1/2”
Rectangular Notcher 2-1/2” x 3-1/2” x 1/2”
Flat Bar Shear Capacity  24” in 5/8”
Maximum Width x Thickness 16” in 3/4”
Blade Length 24-3/8”
Capacity 45° 3-1/8” x 3-1/8” x 3/8”